|
|
|
序號 |
作者姓名 |
論文題目 |
學科門類編號 |
發表年 |
刊物名稱 |
論文等級 |
備注 |
1 |
ZhiqiangLiu(劉志強) |
Research on an Improved Sliding Mode Observer for Speed Estimation in Permanent Magnet Synchronous Motor |
2 |
2022 |
processes |
7 |
|
2 |
陳耿彪 |
Effects of Mo Content on the Microstructure and Mechanical Properties of TiNbZrMox High-Entropy Alloys |
2 |
2022 |
Journal of Alloys and Compounds |
7 |
|
3 |
陳小敏 |
High-temperature deformation characteristics and constitutive models of Inconel 625 superalloy |
2 |
2022 |
Materials Today Communications |
7 |
|
4 |
鄧樺坤 |
AA5052 failure prediction of electromagnetic flanging process using a combined fracture model |
2 |
2022 |
Archives of Civil and Mechanical Engineering |
7 |
|
5 |
杜榮華 |
交通環境能量采集及自供能交通設施健康狀態監測研究進展 |
2 |
2022 |
儀器儀表學報 |
A2 |
|
6 |
高凱 |
基于多頭注意力的 CNN-LSTM 的換道意圖預測 |
2 |
2022 |
機械工程學報 |
2-A2 |
|
7 |
高凱 |
Instantaneous Lane-Changing Type Aware Lane Change Prediction Based on LSTM in Mixed Traffic Scenario |
2 |
2022 |
Journal of Circuits, Systems and Computers |
7 |
|
8 |
高凱 |
False Data Injection Attack Detection in a Platoon of CACC in RSU |
2 |
2022 |
TrustCom 2022（CCF-C） |
7 |
|
9 |
高凱（導師） |
An Adaptive Tracking-Extended Kalman Filter for SOC Estimation of Batteries with Model Uncertainty andSensor Error |
2 |
2022 |
Energies |
7 |
|
10 |
高凱（導師） |
Forgery Trajectory Injection Attack Detection for Traffic Lights under Connected Vehicle
Environment |
2 |
2022 |
TrustCom 2022（CCF-C） |
7 |
|
11 |
賀尚紅 |
機械產品設計中基于多模型集成的二次開發
技術研究 |
2 |
2022 |
現代制造工程 |
|
|
12 |
賀湘宇（研究生第一） |
Design and energy analysis of novel hydraulic regenerative potential energy systems |
2 |
2022 |
Energy |
7 |
|
13 |
胡波(導師) |
微小型減速器離合保護結構設計與試驗 |
2 |
2022 |
機械傳動 |
6 |
|
14 |
胡宏偉 |
Ultrasonic Characterization Method of Carbon Nanotubes
Orientation Using Sparse Representation |
2 |
2022 |
Russian Journal of Nondestructive Testing |
7 |
|
15 |
胡宏偉（導師) |
Ultrasonic phased array phase shift migration imaging of irregular surface components using attenuation compensation and anti-aliasing technique |
2 |
2022 |
NDT&E International |
7 |
|
16 |
胡林 |
Investigation on AEB Key Parameters for Improving Car to Two-Wheeler Collision Safety Using In-Depth Traffic Accident Data |
2 |
2022 |
IEEE Transactions on Vehicular Technology |
7 |
|
17 |
胡林 |
Injury severity analysis of electric bike crashes in Changsha, Hunan Province: taking different lighting conditions into consideration |
2 |
2022 |
Transportation Safety and Environment |
7 |
|
18 |
胡林 |
The Real-World Effects of Route Familiarity on Drivers' Eye Fixations at Urban Intersections in Changsha, China |
2 |
2022 |
International Journal of Environmental Research and Public
Health |
7 |
|
19 |
胡林 |
A study on energy distribution strategy of electric vehicle hybrid energy storage system considering driving style based on real urban driving data |
2 |
2022 |
Renewable and Sustainable Energy Reviews |
7 |
|
20 |
胡林 |
Performance evaluation strategy for battery pack of electric vehicles: Online estimation and offline evaluation |
2 |
2022 |
Energy Reports |
7 |
|
21 |
胡林 |
Investigating the severity of non-urban road traffic accidents in typical regions of Sichuan and Guizhou, China |
2 |
2022 |
Traffic Injury Prevention |
7 |
|
22 |
胡林 |
電動汽車鋰離子電池-超級電容混合儲能系統能量分配與參數匹配研究綜述 |
2 |
2022 |
機械工程學報 |
2-A2 |
|
23 |
胡永樂 |
Multi-Objective Optimization of Process Parameters in Laser Cladding CoCrCuFeNi High-Entropy Alloy Coating |
2 |
2022 |
Journal of Thermal Spray Technology |
7 |
|
24 |
胡永樂 |
On the enhanced wear resistance of laser-clad CoCrCuFeNiTix high-entropy alloy coatings at elevated temperature |
2 |
2022 |
Tribology International |
7 |
|
25 |
黃龍 |
Design and kinematic analysis of a rigid-origami-based underwater sampler with deploying-encircling motion |
2 |
2022 |
Mechanism and Machine Theory |
7 |
|
26 |
黃龍 |
Equilibrium Conformation of a Novel Cable-Driven Snake-Arm Robot under External Loads |
2 |
2022 |
Micromachines |
7 |
|
27 |
黃龍 |
Design of an origami-based cylindrical deployable mechanism |
2 |
2022 |
Mechanical Sciences |
7 |
|
28 |
黃龍(導師) |
Design and analysis of a tendon-driven snake-arm robot based on a spherical magnets |
2 |
2022 |
Transactions of the Canadian Society for Mechanical Engineering |
7 |
|
29 |
黃龍(導師) |
絲驅動蛇形臂機器人的被動柔順特性分析 |
2 |
2022 |
機械科學與技術 |
5 |
|
30 |
黃龍(導師) |
An Origami-Inspired Quasi-zero Stiffness Structure for Low-Frequency Vibration Isolation |
2 |
2022 |
Journal of Vibration Engineering and Technologies |
7 |
|
31 |
蔣仁言 |
兩類高度截尾數據及其參數估計問題 |
2 |
2022 |
機械工程學報 |
2-A2 |
|
32 |
蔣仁言(導師)，熊彬彬 |
基于等效加工時間模型的機床退化過程建模 |
2 |
2022 |
吉林大學學報(工學版) |
2-A2 |
|
33 |
雷正保（導師） |
Multi-objective optimization design of postsoil
system for enhanced W-beam guardrail
containment performance |
2 |
2022 |
International Journal of Crashworthiness |
7 |
|
34 |
雷正保（導師） |
A bounded randomly variable shape multi-quadric interpolation method in dual reciprocity boundary element method |
2 |
2022 |
Engineering Analysis with Boundary Elements |
7 |
|
35 |
雷正保（導師） |
抗撞結構樁基承載能力的撞擊頭部設計方法 |
2 |
2021 |
振動與沖擊 |
5 |
|
36 |
雷正保（導師） |
基于護欄性能指標的集成式人工智能模型研究 |
2 |
2022 |
湖南文理學院學報(自然科學版) |
7 |
|
37 |
雷正保（導師） |
立柱埋深檢測修正方法及埋深檢測儀器研制 |
2 |
2022 |
武漢理工大學學報 |
6 |
|
38 |
李奇奇 |
Morning
glory-inspired lattice structure with negative Poisson's ratio effect |
2 |
2022 |
International Journal
of Mechanical Sciences |
7 |
|
39 |
李奇奇 |
Parametric Analyses on Axial Compression Performance of Bio-inspired Porous Lattice structures |
2 |
2022 |
Thin-Walled Structures |
7 |
|
40 |
李奇奇 |
Axial compression performance of a bamboo-inspired porous lattice structure |
2 |
2022 |
Thin-Walled Structures |
7 |
|
41 |
李奇奇 |
Bionic polycellular
structures for axial compression |
2 |
2022 |
International Journal
of Mechanical Sciences |
7 |
|
42 |
李奇奇 |
Axial crashworthiness and multi-objective optimization of single-hat beams with sinusoidal cross-sections |
2 |
2022 |
Structural and Multidisciplinary Optimization |
7 |
|
43 |
李奇奇 |
Mitigation of impact force through optimisation of three-phase locally resonant structures |
2 |
2022 |
International Journal
of Mechanical Sciences |
7 |
|
44 |
李岳林 |
負氣門重疊對摻氫天然氣HCCI發動機燃燒特性的影響研究 |
2 |
2022 |
機械科學與技術 |
5 |
|
45 |
廖家才 |
Dandelion segmentation with background transfer learning and RGB-attention module |
2 |
2022 |
Computers and Electronics in Agriculture |
7 |
|
46 |
劉鑫 |
An efficient multi-objective reliability-based design optimization method for structure based on probability and interval hybrid model |
2 |
2022 |
Computer Methods in Applied Mechanics and Engineering |
7 |
|
47 |
劉鑫 |
An improved first order approximate reliability analysis method for uncertain structures based on evidence theory |
2 |
2022 |
Mechanics Based Design of Structures and Machines，
An International Journal |
7 |
|
48 |
劉鑫 |
The multi-objective reliability-based design optimization of buffering characteristics of airbag seat in manned airdrop |
2 |
2022 |
International Journal of Crashworthiness |
7 |
|
49 |
劉鑫 |
基于概率-概率盒混合模型的氣囊座椅防護特性可靠性分析方法 |
2 |
2022 |
機械工程學報 |
2 |
|
50 |
劉鑫 |
基于混合模型汽車結構耐撞性的可靠性優化設計 |
2 |
2021 |
長沙理工大學學報 |
6 |
2021年漏報 |
51 |
劉鑫 |
An Efficient Multi-objective Optimization Method Based on the Adaptive Approximation Model |
2 |
2022 |
the 2021 International Conference of Mechanical Design & the 21th Mechanical Design Annual Conference (ICMD2021) |
7 |
|
52 |
龍春光（導師） |
載荷和轉速對HDPE多元復合材料摩擦學性能的影響 |
2 |
2022 |
潤滑與密封 |
6 |
|
53 |
龍春光（導師） |
PE?UHMW/海泡石纖維復合材料的力學性能與摩擦學性能研究 |
2 |
2022 |
中國塑料 |
5 |
|
54 |
盧先正 |
Tunable mechanical and degradation properties of biodegradable Mg-Y-Zn alloys via Zn content regulation |
2 |
2022 |
Journal of Materials Research and Technology |
7 |
|
55 |
呂鐸 |
Ultrasonic C-scan image restoration method using the Richardson-Lucy algorithm and a flaw measurement model |
2 |
2022 |
Applied Acoustics |
7 |
|
56 |
毛聰 |
Simulation and experiment of electroplated grinding wheel with orderly-micro-grooves |
2 |
2022 |
Journal of Manufacturing Processes |
7 |
|
57 |
毛聰 |
Tensile behaviors of laser-discrete-quenched substrate/nickel coating of electroplated grinding wheel |
2 |
2022 |
International Journal of Precision Engineering and Manufacturing-Green Technology |
7 |
|
58 |
苗秀娟 |
Effect of low operating temperature on the aerodynamiccharacteristics of a high-speed train |
2 |
2022 |
Journal of Zhejiang University-SCIENCE A |
7 |
|
59 |
榮見華（研究生第一） |
考慮屈曲約束的無鉸鏈多輸入多輸出柔性機構拓撲優化設計方法 |
2 |
2022 |
機械強度 |
5 |
|
60 |
唐昆 |
小口徑雙非球面硫系玻璃鏡片精密熱壓成形模具制造 |
2 |
2022 |
中國機械工程 |
3 |
|
61 |
仝永剛 |
Microstructure and properties of CoCrNiFeMnAl0.5 high-entropy alloys prepared by gas atomization combined with oscillatory pressure sintering |
2 |
2022 |
Intermetallics |
7 |
|
62 |
仝永剛 |
TiC strengthened CoCrNi medium entropy alloy: Dissolution and precipitation of TiC and its effect on microstructure and performance |
2 |
2022 |
Transactions of Nonferrous Metals Society of China |
7 |
|
63 |
仝永剛 |
Damage behavior and mechanism of C/C-SiC composite ablated under different environments |
2 |
2022 |
Advanced Composites and Hybrid Materials |
7 |
|
64 |
仝永剛 |
Tough and wear-resistant carbon fiber reinforced TiC-based composite prepared by alloyed melt infiltration at low temperatures |
2 |
2022 |
Ceramics
International |
7 |
|
65 |
仝永剛 |
Effect of Ti–Cu alloy's composition on microstructure and performance of carbon fiber reinforced TiC-based composites prepared by alloyed reactive melt infiltration |
2 |
2022 |
Ceramics
International |
7 |
|
66 |
仝永剛 |
Real-time atomic deformation behavior of nano CoCrCuFeNi high-entropy alloy |
2 |
2022 |
Transactions of Nonferrous Metals Society of China |
7 |
|
67 |
仝永剛（研究生第一） |
Effect of Tantalum content on microstructure and mechanical properties of CoCrNiTax medium entropy alloys |
2 |
2022 |
Materials Science & Engineering A |
7 |
|
68 |
仝永剛（研究生第一） |
Outstanding yield strength of CoCrNiTa0.1 medium entropy alloy under the synergistic regulated with nanoprecipitation and grain refining |
2 |
2022 |
Journal
of Alloys and Compounds |
7 |
|
69 |
仝永剛（研究生第一） |
分子動力學方法在高熵合金研究中的應用現狀與展望 |
2 |
2022 |
中國有色金屬學報 |
3-A3 |
* |
70 |
仝永剛（研究生第一） |
Microstructure and Performance of Fe50Mn30Cr10Ni10 High-Entropy Alloy Produced by High-Efficiency and Low-Cost Wire Arc Additive Manufacturing |
2 |
2022 |
Lubricants |
7 |
|
71 |
王方 |
Numerical investigation of the rider's head injury in typical single-electric self-balancing scooter accident scenarios |
2 |
2022 |
Journal of The Royal Society Interface |
7 |
|
72 |
王方 |
Should anthropometric differences between the commonly used pedestrian computational biomechanics models and Chinese population be taken into account when predicting pedestrian head kinematics and injury in vehicle collisions in China? |
2 |
2022 |
Accident Analysis and Prevention |
7 |
|
73 |
王方 |
Evaluation of the Head Protection Effectiveness of Cyclist Helmets Using Full-Scale Computational Biomechanics Modelling of Cycling Accidents |
2 |
2022 |
Journal of Safety Research |
7 |
|
74 |
王開明 |
Research and progress of laser cladding: Process, materials and applications |
2 |
2022 |
Coatings |
7 |
|
75 |
王向紅 |
Effect of Pore Morphology of Composites on Ultrasonic
Attenuation Coefficient Based on Fractal Theory |
2 |
2022 |
Russian Journal of Nondestructive Testing |
7 |
|
76 |
王向紅 |
Three-point bending properties of 3D_C/C_TiC_Cu composites
based on acoustic emission technology |
2 |
2022 |
Mechanical Systems and Signal Processing |
7 |
|
77 |
王向紅 |
Simulation and experimental research on nonlinear ultrasonic testing of composite material porosity |
2 |
2022 |
Applied Acoustics |
7 |
|
78 |
吳鋼 |
Research on Performance Optimization of Liquid Cooling and Composite Phase Change Material Coupling Cooling Thermal Management System for Vehicle Power Battery |
2 |
2022 |
Journal of Renewable Materials |
7 |
|
79 |
吳鋼 |
A skeletal mechanism for biodiesel-dimethyl ether combustion in engines |
2 |
2022 |
Fuel |
7 |
|
80 |
吳鋼（導師） |
鈰基和鑭基復合氧化物催化劑催化碳煙燃燒性能研究 |
2 |
2022 |
西華大學學報(自然科學版) |
7 |
|
81 |
武和全 |
側面碰撞遠端老年乘員損傷研究 |
2 |
2022 |
汽車技術 |
5 |
|
82 |
武和全 |
Research on Neck Response of Elderly Drivers in Rear Collision |
2 |
2022 |
Biomed Research International |
7 |
|
83 |
徐曉強 |
Mobile device-based bearing diagnostics with varying speeds |
2 |
2022 |
Measurement |
7 |
|
84 |
嚴一雄 |
Dynamic Induction Heating Temperature Field Analysis of Spiral Bevel Gears |
2 |
2022 |
APPLIED SCIENCES-BASEL |
7 |
|
85 |
嚴一雄 |
Helical displacement Talbot lithography for duty cycles
of periodic patterning |
2 |
2022 |
Journal of Optics |
7 |
|
86 |
易可夫 |
An Improved YOLOX model and Domain Transfer Strategy for Nighttime Pedestrian and Vehicle Detection |
2 |
2022 |
APPLIED SCIENCES-BASEL |
7 |
|
87 |
余小峰（導師） |
分散相形態對MWCNTs/PBT/HDPE共混物摩擦磨損性能的影響 |
2 |
2022 |
潤滑與密封 |
6 |
|
88 |
張健 |
Hydrogen storage properties of magnesium hydride catalyzed by Ni-based solid solutions |
2 |
2022 |
Transactions of Nonferrous Metals Society of China |
7 |
|
89 |
張健 |
釬焊金剛石工具失效機理及其抑制策略研究進展 |
2 |
2022 |
材料導報 |
7 |
|
90 |
張?。▽煟?/span> |
Investigation on hydrogen storage properties of as-cast, extruded and swaged Mg-Y-Zn alloys |
2 |
2022 |
International Journal of Hydrogen Energy |
7 |
|
91 |
張?。▽煟?/span> |
Laser in-situ preparation and mechanical properties of VC reinforced Fe-based wear-resistant composite cladding |
2 |
2022 |
Ceramics International |
7 |
|
92 |
張?。▽煟?/span> |
Cu-induced enhancement of interfacial bonding for brazed diamond grits with Ni-Cr filler alloys |
2 |
2022 |
International Journal of Refractory Metals and Hard Materials |
7 |
|
93 |
張健（導師） |
Effect of CeSi2 addition on microstructures of brazed layers and interfacial characteristics of brazed diamonds with Ni-Cr filler alloy |
2 |
2022 |
Diamond and Related Materials |
7 |
|
94 |
張?。▽煟?/span> |
A comparative study on hydrogen storage properties of as-cast and extruded Mg-4.7Y-4.1Nd-0.5Zr alloys |
2 |
2022 |
Journal of Physics and Chemistry of Solids |
7 |
|
95 |
張?。▽煟?/span> |
Microstructures and hydrogen storage properties of Mg-Y-Zn rare earth magnesium alloys with different Zn content: Experimental and first-principles studies |
2 |
2022 |
Materials Today Communications |
7 |
|
96 |
張健（導師） |
First-principles calculations on brazed diamond with FeCoCrNi high entropy alloys doped with strong carbide-forming elements |
2 |
2022 |
Solid State Communications |
7 |
|
97 |
張明軍 |
Impact of power modulation on weld appearance and
mechanical properties during laser welding of AZ31B magnesium alloy |
2 |
2022 |
Optics
& Laser Technology |
7 |
|
98 |
張明軍 |
AZ31B鎂合金可調環形光纖激光焊接試驗研究 |
2 |
2022 |
中國激光 |
7 |
|
99 |
張明軍 |
納秒脈沖激光清洗對AZ31B鎂合金激光焊接質量的影響 |
2 |
2022 |
汽車工程 |
2-A2 |
|
100 |
張明軍 |
Impact of ultrasonic vibration on microstructure and mechanical properties of diamond in laser brazing with Ni–Cr filler alloy |
2 |
2022 |
Ceramics International |
7 |
|
101 |
張明軍 |
Microstructure and properties at bonds of diamond grains and NiCr filler alloy by fiber laser brazing |
2 |
2022 |
Diamond and Related
Materials |
7 |
|
102 |
張明軍（研究生第一） |
Active laser brazing of diamond onto 45 steel: Diamond flow behavior, microstructure and bonding strength |
2 |
2022 |
Diamond and Related
Materials |
7 |
|
103 |
張旭 |
Numerical simulation and experimental study on electromagnetic
punching-flanging process of 6061 aluminum alloy sheets |
2 |
2022 |
Journal of Manufacturing Processes |
7 |
|
104 |
周小杰 |
Effect of LPSO orientation on the compression behavior and workability of the Mg-5Gd-3Y–1Zn-0.5Zr alloy |
2 |
2022 |
Materials Science and Engineering: A |
7 |
|
105 |
周小杰(導師) |
Effects of heat treatment on mechanical properties of an extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr alloy and establishment of its Hall–Petch relation |
2 |
2022 |
Journal of Magnesium and Alloys |
7 |
|
106 |
周小杰(導師) |
Tensile behavior at various temperatures of the Mg-Gd-Y-Zn-Zr alloys with different initial morphologies of LPSO phases prior to extrusion |
2 |
2022 |
Materials Science and Engineering: A |
7 |
|
107 |
周小杰(導師) |
Hot Compression Behavior and Workability of Mg-5Gd-3Y-2Zn-0.5Zr Alloy with Long-Period Stacking Ordered Phases |
2 |
2022 |
Journal of Materials Engineering and Performance |
7 |
|
108 |
周振華（研究生第一） |
壓電執行器改進Bouc-Wen模型及其定位補償控制研究 |
2 |
2022 |
振動與沖擊 |
3-A3 |
|
109 |
周振華（研究生第一） |
壓電執行器的非對稱動態遲滯特性建模研究 |
2 |
2022 |
儀器儀表學報 |
2-A2 |
|
110 |
鄒鐵方（導師） |
真實事故中通過制動控制降低人地碰撞損傷的潛在效益及時空約束 |
2 |
2021 |
機械工程學報 |
2 |
|
111 |
鄒鐵方（導師） |
自行車座高對騎車人脊背前傾角和頭部損傷的影響 |
2 |
2022 |
汽車安全與節能學報 |
5 |
|
112 |
鄒鐵方（導師） |
耦合氣囊及制動控制對人地碰撞損傷的防護及效果評估 |
2 |
2022 |
汽車安全與節能學報 |
5 |
|
113 |
鄒鐵方（導師） |
A method for analyzing accident reconstruction results under complex uncertain conditions |
2 |
2022 |
INTERNATIONAL JOURNAL OF CRASHWORTHINESS |
7 |
|
114 |
鄒鐵方（導師） |
Methods for fusing uncertain results obtained from different models in accident reconstruction |
2 |
2022 |
Forensic Sciences Research |
5-B3 |
|
115 |
鄒鐵方（導師） |
基于車輛運動控制的人地碰撞損傷防護新技術接受度研究 |
2 |
2022 |
鐵道科學與工程學報 |
7 |
|
116 |
陳耿彪 |
《液壓傳動》研討式教學實踐研究 |
人文社科類 |
2021 |
高等教育研究 |
|
|
117 |
胡波 |
融合真實與虛擬實驗的液壓傳動實驗教學與實踐 |
人文社科類 |
2022 |
現代信息科技 |
|
|
118 |
鄒鐵方 |
復雜多形態耦合碰撞事故分步仿真 |
人文社科類 |
2022 |
實驗技術與管理 |
|
|
119 |
王方 |
智能汽車新工科人才培養實踐教學體系探索 |
人文社科類 |
2022 |
時代汽車 |
|
|
120 |
王方 |
新時期背景下的汽車設計課程設計教學改革 |
人文社科類 |
2022 |
時代汽車 |
|
|
121 |
陳小敏 |
《機械設計基礎》課程思政改革探索 |
人文社科類 |
2022 |
教育前沿 |
|
|
122 |
李奇奇 |
新四化牽引的汽車類專業培養體系升級改造初探 |
人文社科類 |
2022 |
時代汽車 |
|
|
